Joints Bearing

  • Bearing Type:Joints Bearing
  • Inner Diameter(id):0.5mm - 4000mm, Support Customized
  • Outer Diameter(od):0.5mm - 8000mm, Support Customized
  • Width/thickness(t):0.5mm - 5000mm, Support Customized
  • Origin Place:Wuxi or Dalian or Shandong , China
  • Delivery Scope:Europe, Asia, America, Africa, Oceania
  • Pack Solution:Single, Barrel, Paper Roll, Bulk
  • Global Payment:T/T, Paypal, L/C, Western Union
    
    Lotton joint bearing is mainly composed of a spherical inner ring and an outer ring bearing the special structure of the inner spherical surface. Can withstand a greater load.
    Brief introduction
    Lotton joint bearing structure simpler than the rolling bearing, which is mainly composed of an inner and outer sphere within a spherical outer ring. Lotton Bearings are generally used for lower-speed swing motion (ie angular motion), the sliding surface of the spherical shape, but also for the tilt angle within a certain range of motion (ie, aligning movement), except in the support shaft and the shaft housing bore When the heart of a large, still work properly.
    Feature
    Lotton joint bearings can withstand a greater load. According to their different types and structures to withstand radial load, axial load or radial, axial joint load. Since the inner surface of the outer sphere inlaid with composite materials, so the bearings can be produced in the work of self-lubricating. Generally used for lower-speed swing motion, and low-speed rotation, but also for a certain tilt angle range of motion, while supporting shaft and housing bore axis misalignment is large, can still work. Lotton self-lubricating bearing joints used in water conservancy, specialized machinery and other industries.
    Application
     Lotton Lotton self-lubricating bearings joint bearings are widely used in hydraulic engineering, metal forming machine tools, engineering machinery, automation equipment, automotive shock absorbers, irrigation machinery and other industries. Lotton joint bearing is spherical plain bearings, the basic type is within the spherical sliding spherical contact surface of the outer ring. Depending on the structure and type, can withstand the radial load, axial load, or radial, axial joint load.
    Because spherical plain bearings sliding contact Lotton area, tilt angle, but also because most of Lotton joint bearing take special process method, such as surface phosphate, zinc, chrome or outside the sliding surface lining, insert pad, spray etc. Therefore, greater load capacity and impact resistance, and has anti-corrosion, wear resistance, self-aligning, self-lubricating lubrication or no lubrication good dirt pollution characteristics, even dislocation can be installed to work properly. Therefore, Lotton joint bearings are widely used for lower-speed swing motion, tilt movement and rotation.
    Composition
    Lotton mainly by a joint bearing outer ring and an inner components. Spherical outer ring and the inner ring of the composition of the inner spherical surface rolling friction.
    Lotton joint bearing performance
    Lotton bearing joints due to the form and structure of the working mechanism of the Rolling Lotton bearing joints completely different, so Lotton bearing joints has its own technical characteristics and maintenance requirements.
    Operating temperature 
    Lotton bearing joints allow the working temperature is mainly determined by the material pairing between the bearing sliding surfaces, especially plastic material sliding surface Lotton self-lubricated bearing joints, its carrying capacity at high temperatures have decreased. When the sliding surface material bearing joints lubricated Lotton pairing of steel / steel, the allowable operating temperature depends on the permissible operating temperature of the lubricant. But for all the lubrication type and self-lubricated bearing joints Lotton concerned, may, within -30 ℃ ~ + 80 ℃ temperature range, and maintaining the correct tolerance.
    Dip
    Lotton bearing joints are generally much larger than the Rolling adjustable inclination of the heart, it is suitable for use in demanding concentricity supporting parts, Lotton angle with the form of joint bearing bearing structure size, type, sealing means and the support varies inclination range Lotton generally spherical plain bearings is 3 ° ~ 15 °, inclination range Lotton angular contact bearings is 2 ° ~ 3 °, inclination range Lotton thrust bearings are 6 ° ~ 9 °.
    Coordinate
    In any case, Lotton bearing joints shall be chosen so that the ferrule with uneven deformation occurs, with the nature and level of their choice must be determined according to bearing type, load bearing form and size of the working conditions.
    Handling
     Lotton Lotton joint bearing joint bearing handling should follow the principle that the force exerted by the assembly and disassembly can not directly pass through the spherical sliding surface. In addition, you should use an auxiliary handling tools, such as a sleeve puller, etc., outside the loading force applied directly and uniformly applied to the mating ferrule, or other auxiliary heating methods no-load handling.
    Installation
    When assembling the Lotton joint bearing series, it is necessary to pay special attention to the position of the outer surface of the split. In order to avoid compliance with a direct role in the split face, the need to maintain and meet the dividing plane at right angles to the direction.
    Lubricating
    When the applied load and speed oscillating movement generated very hour, Lotton to oil-bearing joints can be operated without lubrication conditions. Nevertheless, under normal circumstances must be replenished periodically grease. Operation during the initial installation, it is recommended lubrication intervals need moderately reduced.
    Lotton no case to oil-lubricated bearing joints can no longer use under. However, if before the operation was added lithium soap grease life Lotton bearing joints can speak more extended. If the grease around the bearing space, Lotton bearing joints will be more effective protective dust and foreign matter invasion.
    Lotton joint bearing classification and characteristics
    Lotton Spherical Plain Bearings
     Lotton Spherical Plain Bearings (1) GE ... E Type: Every single outer ring, no oil tank. Can withstand the radial load and smaller in either direction axial load.
    (2) GE ... ES type: single seam outer ring, there are oil tank. Can withstand the radial load and smaller in either direction axial load.
    (3) GE ... ES-2RS type, GEEW ... ES-2RS type: single seam outer ring, there are oil tank, sides with a ring. Can withstand the radial load and smaller in either direction axial load.
    (4) GE ... ESN type: single seam outer ring, GE ... XSN type: double-slit outer ring (split outer ring), there are oil tank, with snap groove on the outer ring. Can withstand the radial load and smaller in either direction axial load. However, the snap ring axial load to bear, its ability to withstand axial load is reduced.
    (5) GE ... HS type: inner ring with oil tank, double and a half of the outer ring, worn clearance can be adjusted. Can withstand the radial load and smaller in either direction axial load.
    (6) GE ... DE1 type: inner ring of hardened bearing steel, bearing steel outer ring. When the inner assembly extrusion with lubrication grooves and hole. An inner diameter of less than 15mm bearings, no lubrication grooves and hole. Can withstand the radial load and smaller in either direction axial load.
    (7) GE ... DEM1 type: inner ring of hardened bearing steel, bearing steel outer ring. When the inner assembly extrusion, bearing into the bearing after the end of the press in the outer ring of the bearing axial groove fixed. Can withstand the radial load and smaller in either direction axial load.
    (8) GE ... DS type: outer ring fitting groove and lubrication groove. Confined to large size bearings. Can withstand the radial load and any direction of smaller axial load (fitting groove side can not bear axial load).
    Angular contact spherical plain bearings Lotton
    GAC ... S-type inner and outer rings are hardened bearing steel outer ring grooves and hole. Can withstand the radial load and an axial direction (joint) load.
    Lotton thrust bearing joints
    GX ... S-type shaft ring and seat are hardened bearing steel; seat and have sump hole. It can withstand a direction of the axial load or combined load (in this case the radial load value not greater than 0.5 times the value of axial load).
    Lotton rod ends
    Lotton rod end (1) SI ... E-type is GE ... E type bearings and rod end assembly. Rod ends with female thread, material is carbon steel, no oil tank. Can withstand the radial load and axial load in any direction is less than or equal to 0.2 times the radial load.
    (2) SA ... E-type is GE ... E type bearings and rod end assembly. Rod ends with male thread, material is carbon steel; no oil tank, can withstand the radial load and in either direction is less than or equal to 0.2 times the radial load of axial load.
    (3) SI ... ES type is GE ... ES-type bearings and rod end assembly. Rod ends with female thread, material is carbon steel; there are oil tank. Can withstand the radial load and axial load in any direction is less than or equal to 0.2 times the radial load.
    (4) SA ... ES type is GE ... ES-type bearings and rod end assembly. Rod ends with male thread, material is carbon steel; there are oil tank. Can withstand the radial load and axial load in any direction is less than or equal to 0.2 times the radial load.
    (5) SIB ... S-type rod end with female thread, material is carbon steel; inner ring of hardened bearing steel; there are oil tank. Can withstand the radial load and axial load in any direction is less than or equal to 0.2 times the radial load.
    (6) SAB ... S-type rod end with male thread, material is carbon steel; inner ring of hardened bearing steel; there are oil tank. Can withstand the radial load and axial load in any direction is less than or equal to 0.2 times the radial load.
    (7) SQ ... type of ball joint Lotton rod end bearings, rod end is carbon steel; a hardened steel ball. Can withstand the radial load and smaller in either direction axial load.
    Lotton self-lubricating spherical plain bearings
     Lotton self-lubricating spherical plain bearings (1) GE ... C type and GE ... T type: Extruded outer, outer sliding surface of the sintered bronze composite; inner ring of hardened bearing steel, hard chrome plated slide. Confined to the small size of the bearing. Outer ring of bearing steel, the sliding surface of a layer of polytetrafluoroethylene fabric. The inner ring of hardened bearing steel, hard chrome plated slide. Able to withstand the same load direction, the radial load at the same time, can withstand a small axial load in either direction.
    (2) GE ... CS-2Z type: outer ring of the bearing steel, sliding surface sintered bronze composite; inner ring of hardened bearing steel, hard chrome plated slide; both sides with a dust cover. Able to withstand the same load direction, the radial load at the same time able to withstand smaller in either direction axial load.
    (3) GEEW ... T type: outer ring of the bearing steel, sliding surface layer of polytetrafluoroethylene fabric; inner ring of hardened bearing steel, hard chrome plated slide. Able to withstand the same load direction, the radial load, and can withstand a small axial load in either direction.
    (4) GE ... F type: Outer ring of hardened bearing steel, sliding surface PTFE glass fiber reinforced plastics additives, inner ring of hardened bearing steel, hard chrome plated slide. Can withstand the constant direction of moderate radial loads.
    (5) GE ... F2 type: glass fiber reinforced plastic outer sliding surface of PTFE as an additive of glass fiber reinforced plastics; inner ring of hardened bearing steel, hard chrome plated slide. Can withstand the constant direction of moderate radial loads.
    (6) GE ... FSA carbon steel outer ring of the sliding surface made with Teflon additive composition of glass fiber reinforced plastic discs, with fixation to the outer; inner ring of hardened bearing steel. For large and extra large bearings. Can withstand high radial loads.
    (7) GE ... FIH outer ring of hardened bearing steel; inner ring of carbon steel, the sliding surface made with Teflon additive composition of glass fiber reinforced plastic discs, and fixed to the inner ring fixed; double half outer ring. For large and extra large bearings. Can withstand high radial loads.
    Self-lubricating spherical plain bearings Angular contact Lotton
    GAC ... F-type outer ring of hardened bearing steel; sliding surface of PTFE as an additive of glass fiber reinforced plastics; inner ring of hardened bearing steel, hard chrome plated slide. Can withstand the radial load and an axial direction (joint) load.
    Lotton self-lubricating thrust bearing joints
    GX ... F-type seat of hardened bearing steel, sliding surface of PTFE as an additive glass fiber reinforced plastic, shaft ring of hardened bearing steel, hard chrome plated slide. It can withstand one direction axial load or combined load (in this case from the radial load value not greater than 0.5 times the axial load value).
    Lotton self-lubricating rod ends
    Lotton self-lubricating rod ends (1) SI ... C type is CE ... C-type bearings and rod end assembly. Rod ends with female thread, material is carbon steel. Able to withstand the same load direction. In the radial load at the same time can withstand either direction is less than or equal to 0.2 times the radial load of axial load.
    (2) SA ... C type is CE ... C-type bearings and rod end assembly. Rod ends with male thread, material is carbon steel. Able to withstand the same load direction. In the radial load at the same time can withstand either direction is less than or equal to 0.2 times the radial load of axial load.
    (3) SI ... CS-2Z-type assembly is GE ... CS-2Z type bearings and rod end. Rod ends with female thread, material is carbon steel. In the radial load at the same time can withstand either direction is less than or equal to 0.2 times the radial load of axial load.
    (4) SA ... CS-2Z-type assembly is GE ... CS-2Z type bearings and rod end. Rod ends with male thread, material is carbon steel. Able to withstand the same load direction. In the radial load at the same time can withstand either direction is less than or equal to 0.2 times the radial load of axial load.
    (5) SIB ... C-type rod end with female thread, material is carbon steel, sintered bronze sliding surface composites; inner ring of hardened bearing steel, hard chrome plated slide. Can withstand the constant radial load direction.
    (6) SAB ... C-type rod end with male thread, material is carbon steel, sintered bronze sliding surface composites; inner ring of hardened bearing steel, hard chrome plated slide. Can withstand the constant radial load direction.
    (7) SIB ... F-type rod end with female thread, material is carbon steel, sliding surface PTFE as an additive to glass fiber reinforced plastics; inner ring of hardened bearing steel, hard chrome plated slide . Can withstand the constant radial load direction.
    (8) SAB ... F-type rod end with male thread, material is carbon steel, PTFE sliding surface with glass fiber reinforced plastics additives; the sliding surface of the inner ring of hardened bearing steel, hard chrome plated. Can withstand the constant radial load direction.
    (9) SQ ... L-type made of special self-lubricating alloy material that can withstand the radial load and any direction of smaller axial load.
    Lotton bearing joints mechanical properties calculation methods
    Spherical Plain Bearings Lotton contact surface (spherical plain bearing) has two "fit" of such contacts is called coordination contacts. Lotton joint bearing structure design method for calculating mechanical properties and wear Lotton bearing joints analysis plays an important role. Calculation coordinate surface contact pressure is a very complex issue, because the limited existing Hertz model elastic half-space, can not be used to calculate the spherical coordinate the contact pressure distribution. There are already a spherical contact unified model, namely Fang model, can solve the problem of small deformed spherical contact pressure distribution, this model for non-contact and coordination coordination contacting apply. But the contact area Lotton of spherical plain bearings is not complete, calculate the contact pressure distribution calculated on the basis of the need for further contact with the complete coordination sphere model. In addition, the process of using Lotton bearing joints also appear free boundary effects, for bearing joints Lotton applications will have some impact. Free boundary effect contact pressure generated in the bearing outer edge Lotton joint focus and greater pressure gradient.